Underground service entrance cable is one of the most common cables. If you wan to buy it, there is a underground service entrance cable price list. In addition, there are several things that you need to be attention to when laying down underground service entrance cable. This is the type of cable that is replacing ABC cable which was often used to connect utility poles to houses to give them power. Placing everything underground makes it easier, however, the cable needs to be strong enough. There are several things that you need to pay attention to when you are laying underground service entrance cable. Let’s discuss what those are to ensure that you will have success.
Make Sure That The Trenches of Underground Service Entrance Cable Deep Enough
The first thing that you need to do is make sure that you have at least 2 feet of soil removed in the trench. If you are going to use PVC, it can be 18 inches. Power lines are designed to be placed in the dirt. Essentially, you can lay everything into the trench, and after you covered up, it will be okay. They are designed to withstand exterior problems such as water, rocks, and anything else that can cause difficulties with a traditional cable. huadongconcentriccable.com/seu-cable
Make Sure That The Trench Of Underground Service Entrance Cable Is Straight
It is so important to have a trench that is perfectly straight, going from the power source to the meter. If you are doing measurements, especially with extremely long trenches, you might end up with cable that is a little too short. In most cases, you should cut the cable a little longer in case you do have some problems. This could be with attaching it, or a portion of the line may not be okay after you have cut it to length. There are always problems that can occur, but you need to make sure that the trenches as straight as possible so that your measurements are accurate when you lay the line. May be you want to learn more.
Check The Line For Problems Before Using It
It is also a good idea to check the line before you put it in the ground. So the quality of you buy urd service entrance cable is important. You can search Huadong Cable Group on the Internet. They can offer you discounted underground service entrance cable with free sample. Just doing a simple test to check conductivity is all that you need to do. Additionally, you should check this once it is attached to the source of electricity and the meter. As long as you are getting a proper reading on the meter, then you will know that it is fully functional. People that very everything before doing a full test may end up having to dig up everything once again.
These are just a few things you need to pay attention to when you are using this type of cable. Unlike a traditional ABC line that is above ground, these are in the ground, typically on a permanent basis. If there are any problems while you are hooking it up, it’s good to notice them early. That way, you can switch out the line, or change anything else that needs to be fixed before you bury it permanently. This is how you can ensure that every job that you do will be completed in an efficient manner when using service entrance cable.